We will shut power off to unit. Remove control board along with its transformer and necessary wiring. Remove blower motor housing and pull out from furnace compartment. Remove old blower motor along with squirrel cage and brackets. Remove old voltage distribution system. Install new OEM blower motor squirrel cage and brackets to existing housing. Also we will install Carbide nitride hot surface igniter and flame rod as part of this option. Once all components are installed we will perform safety and performance evaluation on rest of system. Customer stated Humidifier may not be working. Confirmed baffle for damper is broken in closed position. Was able to manually leave it on the open position along with Humidifier float bowls very dirty cleaned and Humidifier is not working but advised Humidifier should be replaced as the current one is old.
our service area