A new customer who found us online was looking to get his sewer line replaced. One of our senior technicians Jonathan went to the home to video inspect the line to see if there was a repair or deep clog that required replacement. The video inspection of the main sewer line showed that a hydro scouring was needed because there was a major clog, which means cleaning the entire line completely and that would determine whether the line was in good shape for a possible new lining.


Pipe Works Services technicians excavated the area where the blockage was dug down roughly 2 ft and exposed the main sewer line pipe. There was a major clog with roots and sewage in the line. We then jetted line for preparation for the liner. roughly 60 ft of the new liner was installed from the newly installed cleanout to its main and will stop a 10 ft. before the main and from clean out to inside home before the 2nd turn. Finally, they connected the line and covered it with plywood, and fenced it off.

This shows the new lining being entered into the existing sewer line pipe

This shows the major clog that was in the existing sewer line piping